Thesis

UNSPECIFIED (2001) Reduction of required time for cutting process through methods simplification and introduction of tools. Undergraduate thesis, De La Salle University-Dasmariñas.

UNSPECIFIED (2006) A study on minimization of the reject occurrence of 600mL plastmack plastic bottles at Wilkins Philippines Corporation. Undergraduate thesis, De La Salle University-Dasmariñas.

UNSPECIFIED (2005) A study on the reduction of bent lead defects the process of form and sungulation of SOIC at Amkor Technology Philippines, Incorporated. Undergraduate thesis, De La Salle University-Dasmariñas.

Gicana, Karen Niña B. (2006) A study on meeting the target efficiency of production in Double Fashion Garments Factory. Undergraduate thesis, De La Salle University-Dasmariñas.

Lagrama, Jamaica Iris T. (2014) A study on meeting the allowable 0.80% reject rate in the production of connectors (#1, #3,#3.1,#4) amounting to Php 1,114,278.56 of Fravinz Enterprises Inc. from the months of June 2013 to November 2013. Undergraduate thesis, De La Salle University-Dasmarinas.

Lim, Robert Angelo V. and Presincula, Mark Kim C. and Tibayan, Themogene N. (2014) Lightweight load bearing concrete hollow block made with recycled plastic polyethylene. Undergraduate thesis, De La Salle University-Dasmarinas.

Puma, Raymart D. and Rojales, Lorenz Dominic L. and Sagasayan, Cyrus Brent A. (2014) Development of a volume deducing machine for polyethylene terephthalate (PET) bottles. Undergraduate thesis, De La Salle University-Dasmarinas.

Abalos, Priscilla and Hernandez, Dinna and Adao, Agnes (1993) A project feasibility study on a porposed charcoal production in Silang, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Abanto, Robert Andrew and Marasigan, Alex and Ramos, Richard (1993) Loofah production : its market potential. Undergraduate thesis, De La Salle University-Dasmariñas.

Abion, Peter Angelo R. (2009) A study on minimizing the rejects in Bunnysuits in Isuta Philippines, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Abueg, Ryann C. and Guevarra, Bryan B. (2002) The use of sawdust to produce ethanol. Undergraduate thesis, De La Salle University-Dasmariñas.

Acapulco, Nunki V. and Briones, Christopher Hoe and Sisayan, Rochelle (1995) Cassava-tapioca flour manufacturing in Maragondon, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Aclo, Rowena M. and Arafol, Corazon and Reyes, Sherry Rose (1995) Molluscicides manufacturing using tobacco as active ingredient for the irrigated ricefields of Bulacan and Laguna in Pulilan, Bulacan. Undergraduate thesis, De La Salle University-Dasmariñas.

Afable, Ray Alvin B. and Arrienda, Joshua and Belen, Bernard and Guttierez, Albert and Lamosa, Drazen and Rosal, Jayson and Saban, Luigie and Tabar, Rodney and Vitualla, Mark Jeff E. (2006) A study on the improvement of the productivity in Poly Wipes cutting machine of Isuta Philippines, Incorporated. Undergraduate thesis, De La Salle University-Dasmariñas.

Aguilar, Mark Paulo M. (2015) A study on eliminating the 10.30 % production loss in producing oishi sundays blends orange mango juice 35g of liwayway marketing corporation amounting to Php 692, 000 from the month of June to November 2014. Undergraduate thesis, De La Salle University - Dasmariñas.

Agustin, Eugene Vryan G. (2006) A study on maintaining the acceptable defective product output on stem machine process at Global Lighting Philippines, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Alcantara, Reynaldo R. and Manansala, Leo D. (2002) Reduction of soldering defect of NSK-A125 Product in Cavite Nagano Seiko, Incorporated. Undergraduate thesis, De La Salle University-Dasmariñas.

Alvarez, Raquel S. and Nazareno, Jo-Ann G. and Rosales, Juliet B. (1993) A project feasibility study on decorative candles manufacturing in Imus, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Amano, Mary Ann and Bago, Loida and Ramos, Jeffrey (1995) Noodles and pasta manufacturing in Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Ambita, Cherry T. and Asuncion, Jennicel G. and Balean, Eloida S. (1994) The manufacturing & marketability of dried mango slices in Silang, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Amurao, Carl Lino and Balleza, Alfonso Allan and Padilla, Rainier (1994) A project feasibility study on the production of ceramic chandeliers and lamps. Undergraduate thesis, De La Salle University-Dasmariñas.

Anabe, Lexter A. (2014) A study on meeting the 4.3% allowable reject rate in the production of wiring harness of Yumex Philippines Corporation. Undergraduate thesis, De La Salle University-Dasmarinas.

Andal, Liezl and Prevosa, Froilan and de Sagun, Annaliza (1995) A project feasibility study on pig-skin leather bags manufacturing in Bucal, Dasmariñas, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Andreus, Brian and Sarmiento, Noemi and Villarama, Raquel (1997) A project fesibility study on cutlery business in General Mariano Alvarez, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Angcaya, Grace L. and Magbiro, Ma. Meleah and Morelos, Rosette (1996) A project feasibility study on manufacturing carton boxes in Hugo Perez, Trece Martirez City. Undergraduate thesis, De La Salle University-Dasmariñas.

Angcaya,, Cyril John J. (2014) A study to meet the 5% allowable reject rate of frame 2 of the Glory Item at Shinkozan Corporation. Undergraduate thesis, De La Salle University - Dasmariñas.

Antoni, Lorna S. and Toledo, Cherrie and Villacarillo, Maki (1996) Pigskin leather wallet. Undergraduate thesis, De La Salle University-Dasmariñas.

Antonio, Ace G. (2009) A study on minimizing the 14.08% production loss in manufacturing booties in Isuta Philippines, Incorporated. Undergraduate thesis, De La Salle University-Dasmariñas.

Antonio, Neal Jonas A. (2015) A study on increasing the overall equipment effectiveness (OEE) of Unilever personal care plant's superline from 77.17% to 83.35% through changeover reduction. Undergraduate thesis, De La Salle University - Dasmariñas.

Arao, Edlim Elliot M. (2014) A study on eliminating 8.93% production loss encountered in producing Nissin Ramen - Beef amounting to Php 1,007.251 from the month of June - November 2013. Undergraduate thesis, De La Salle University-Dasmarinas.

Arienda, Joshua and Gicana, Karen Niña and Memije, John Francis and Patambang, Jesus and Rodriguez, Lawrence and Salgado, Joanne and Verdey, Criselda (2006) The elimination of the downgrades on the roll forming process of the Production Area at Philmetal Products, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Arollado, Rodel and Carungcong, Jeffrey (2002) Minimize achine breakdown through proper maintenance to increase production at Sydenham Laboratories, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Arollado, Rodel B. and Doydoy, Alejandro L. III (2002) Producing barium ferrite magnets for loudspeaker from steelmill wastes. Undergraduate thesis, De La Salle University-Dasmariñas.

Arroyo, Peter Lorenz B. (2014) Utilization of whiteware ceramics waste as admixture forfine aggregate on concrete. Undergraduate thesis, De La Salle University-Dasmarinas.

Asibu-Yartey, Philip and Tamrakar, Yashna (2002) Using LPG as an alternative to premium petrol in the Philppines. Undergraduate thesis, De La Salle University-Dasmariñas.

Asper, Jose Aristeo D. (2002) Reducing the overlapping testing in Reliability Measurements Laboratory of Philips Semiconductors Philippines, Incorporated. Undergraduate thesis, De La Salle University-Dasmariñas.

Asuncion, Ma. Nerissa M. (2009) Dual commitment of contingent workers in selected manufacturing firms in Cavite. Masters thesis, De La Salle University-Dasmariñas.

Avilla, Michael and Cruz, Jose Edward and Sosa, Emerson (1995) Briquetted charcoal production from coconut shell in Indang, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Avira, Jade Arianne Charisse A. (2015) A study on meeting the 3% allowable reject rate in the production G55 209100406 wire harness amounting to php 3,810,500 from July to December 2014 at Yumex Philippine Corporation. Undergraduate thesis, De La Salle University - Dasmariñas.

Ayon-ayon, Melchor S. (2006) Improving the preparation of solvent required for the production of 1000 liters Roofmaster Paint at the Batching Area of Dutch Boy Philippines, Incorporated. Undergraduate thesis, De La Salle University-Dasmariñas.

Azucena, Rebecca and Palma, Lichel (1997) Establishement of a gabi chips manufacturing business in Silang, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Baldonado, Abigail B. (2014) A study on meeting the 0.90 average allowable defect per unit in the production of TBR model amounting to Php 1,320,493.96 for the month of May-December 2013 in ISUZU Philippines Corporation. Undergraduate thesis, De La Salle University-Dasmarinas.

Balenia, Erma Joy and Mercado, Cherry and Pakinggan, Richelle (1997) A feasibility study on the manufacturing of personalized loofah bill holders in Anabu I Imus, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Balmaseda, Julian Paulo and Buenconsejo, Ritche and Enriquez, Raquel (1996) A project feasibility study on cotton thread production in Bacoor, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Balomaga, Ryan Anthony O. (2014) A study on meeting the allowable 2.00% reject rate in the production of gear tooth sensor in the test operations at Allegro Microsystems Philippines, Incorporated. Undergraduate thesis, De La Salle University - Dasmariñas.

Baltazar, Jean Aileth P. and Punzalan, Bembol C. and Legaspi, Jayson R. (2001) Elimination of under yield paints in dutch boy Philippines incorporation to improve the quality of the product. Undergraduate thesis, De La Salle University-Dasmariñas.

Baria, Ysmael and Vergara, Leonisa and Dela Rea, Maritess (1987) The leading softdrink bottling companies of the Philippines, a comparative research. Undergraduate thesis, De La Salle University-Dasmariñas.

Barruga, Sherene G. (2014) A study in meeting the allowable 2% reject rate in the production of SOT453A units at NXP semiconductors Cabuyao Inc. From June to November 2013 amounting to Php 18,810.360.00. Undergraduate thesis, De La Salle University-Dasmarinas.

Barsales, Alex II D. (2015) A study on eliminating the 4.71% production loss in producing Wafrets Brix Cheese in Universal Robina Corporation amounting to php 4, 264, 515.54 from July to December 2014. Undergraduate thesis, De La Salle University - Dasmariñas.

Barte, Ryan Henry I. (2006) Minimizing the delay in the delivery of fiberglass products in Naturalite Industrial Corporation. Undergraduate thesis, De La Salle University-Dasmariñas.

Base, Arielle A. (2014) A study on eliminating the 17.94% productivity loss inLady's Choice Mayonnaise 3.5 L in Unilever Philippines Inc. Undergraduate thesis, De La Salle University-Dasmarinas.

Batac, Juvena E. (2002) Existence of an average of 8% reject in the production of PE foam with specifications of 40 mm x 1.0 m x 50 m particularly for Kane Packaging Company due to indefinite curing time and improper curing method. Undergraduate thesis, De La Salle University-Dasmariñas.

Batac, Juvena E. and Malabuyoc, Marlon Niño G (2002) Polyethylene (PE) foam : an alternative material which can be used in manufacturing personal life preserver. Undergraduate thesis, De La Salle University-Dasmariñas.

Batallones, Anna Shiela Marie and Marcelina, Anthony and Escueta, Armand (1997) A project feasibility study on decorative kitchen towel manufacturing in Biñan, Laguna. Undergraduate thesis, De La Salle University-Dasmariñas.

Bautista, Edward D. and Bawalan, Romeo V. Jr. and De Joya, Jerick B. (2014) Briquetting of coffee and coconut husks as an alternative for wood charcoal for small scale industry. Undergraduate thesis, De La Salle University-Dasmarinas.

Bautista, Juliet (1998) The feasibility study of establishing a textile manufacturing plant in Dasmariñas, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Bautista, Lailani M. and Mojica, Janice Anne L. and Arbolante, Jephsey G. (1994) A project feasibility study on manufacturing of lowered stainless jeep in Imus, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Bautista, Noralyn and Labayan, Darren and Yap, Sonia (1994) Coco flour manufacturing in Carmona, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Bawar, Rayson and Virgino, Erwin and Velando, Marilou (2002) Process analysis for gear case products. Undergraduate thesis, De La Salle University-Dasmariñas.

Baybay, Charles Aldrin N. and Collamat, Mark Anthony R. and So, Nichol Daniel M. (2014) Production of craft paper out of cogon grass and used paper utilizing the developed machine. Undergraduate thesis, De La Salle University-Dasmarinas.

Bea, Jennifer and Gurrobot, Maricris and Natural, Cristina (1998) A feasibility study on the manufacturing of sinamay Dinette Set in Dasmariñas, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Bedua, Reginald M. and Imperial, Ian Kirby B. and Obina, Angela Jhin R. (2012) Peanut shell as a partial cement replacement in making concrete hollow block. Undergraduate thesis, De La Salle University-Dasmariñas.

Begnalen, Christian C. (2002) Improving the storage system of Sydenham Laboratories and minimize delay in production. Undergraduate thesis, De La Salle University-Dasmariñas.

Bejosano, Cristel Joy R. (2015) A study to meet the 2% allowable reject rate of stoneworks specialists International Corporation in producing the Rib Type Fiberglass Roofing. Undergraduate thesis, De La Salle University - Dasmariñas.

Belardo, Maria Loreta and Desingaño, Melody and Tolentino, Melver (1996) A project feasibility on the manufacturing of carrot chips in Silang, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Belarmino, Eleazar L. (2011) Total quality management and operational performance of small food manufacturing enterprises in Cavite. Masters thesis, De La Salle University-Dasmariñas.

Bellosillo, Bendil Chadwick L. (2002) Re-implementation of the Just In Time (J.I.T.) System in American Standard, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Benabese, Ma. Laarni and Platon, Jasper and Tabunting, Ian Dominic (1995) Vegetable hotdog manufacturing. Undergraduate thesis, De La Salle University-Dasmariñas.

Benavidez, Christopher B. (2005) A study on the reduction of I.T. inventory unfound assets at Nestle Philippines, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Bermudez, Russel Jonas C. and Daño, Alfred Ray O. and Malanyaon, Elfred M. (2015) The development of a semi-continuous process of smoked fish production. Undergraduate thesis, De La Salle University-Dasmarinas.

Buaya, Larni E. (2014) A study on eliminating the 9.20% production loss encountered in producing LC717A00AR capacitance-digital-converter LSI (IC touch sensor) amounting to 20,960,250.79 from the months of June to November 2013. Undergraduate thesis, De La Salle University-Dasmarinas.

Buenaventura, Gilbert and Cristobal, Jomar and Gatan, George (1997) A project feasibility study on the production of papaya catsup in Silang, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Buenaventura, Katrina G. (2014) A study on eliminating 2.02% productivity loss of TR50 units in the final main - off line at Isuzu Philippines Corporation from the month of May to October 2013 amounting to Php 8,460.000. Undergraduate thesis, De La Salle University - Dasmariñas.

Burns, Redd (1995) Establishment of RFB Transit Bus Company-Tagaytay to Batasang Pambansa. Undergraduate thesis, De La Salle University-Dasmariñas.

Caalam, Lourdes (2015) A study on eliminating 5.17% of production loss of the Sichuan Chili oil in the packaging section and boxing section amounting to php 2,814,980.32 from June to November 2014 at Fresh N' Famous incorporated. Undergraduate thesis, De La Salle University - Dasmariñas.

Cabalquinto, Jamila Cathleen G. (2014) A study on eliminating 19.31% production loss of hall sensors in main assembly operations at Allegre Microsystems Philippines Incorporated from the months of January to June 2014 amounting Php 18, 974, 592.00. Undergraduate thesis, De La Salle University - Dasmariñas.

Cabanglan, Joseph Rafael E. (2013) Strategic plan for Techlog Repair Center Remanufacturing Company. Masters thesis, De La Salle University-Dasmariñas.

Cabral, Nayra Maica R. (2012) A study on eliminating the 12.65% production loss of Universal Robina Corporation in Cracker Line 2 of Magic Creams Combo-Peanut. Undergraduate thesis, De La Salle University - Dasmariñas.

Cajigal, Ronnel M. and Brondial, Vincent (2002) Reduction of rejects of wire belted radial production in Good Year Philippines. Undergraduate thesis, De La Salle University-Dasmariñas.

Calalang, Marie Kristine S. (2006) A study on minimization of defective product at Wacker Philippines, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Calasan, David M. (2006) A study on eliminating the rejects of customer on PAD S at Taiphil Packaging Co., Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Camat, Precious R. and De Vera, Siony and Dumalo, Mary Grace (1995) Hand-made paper making using agricultural residues in Pangasinan. Undergraduate thesis, De La Salle University-Dasmariñas.

Camatog, Roselyn and Garcia, Jessica and Hicban, Concorde (1998) A project feasibility study on ginger in cubes manufacturing in Biga Silang, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Camia, Rodrigo III R. (2009) A study on productivity loss of Oishi's Sundays Mango Juice 45g at Liwayway Marketing Corporation. Undergraduate thesis, De La Salle University-Dasmariñas.

Camia, Mylene and Rodenas, Natalia and Rosano, Haidee Rose (1996) MNH buri woven bags prodution inImus, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Candelaria, Filemon and Cristobal, Roque and Reyes,, Jansen (1993) A project feasibility study on the establishment of flavored taho in Las Piñas, Metro Manila. Undergraduate thesis, De La Salle University-Dasmariñas.

Cantimbuhan, Maani and Consuelo, Jasmin V. and Ventura, Ma. Elizabeth (1993) A project feasibility study on cultured straw mushrooms in Dasmariñas, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Capagcuan, Marie Michelle and Gutierrez, Michael John and Hernandez, Al Francis (1996) Banana juice manufacturing. Undergraduate thesis, De La Salle University-Dasmariñas.

Capili, Rowena and Edles, Edsel and Vertucio, Maricel (1998) A project feasibility study on manufacturing of Pink Lady Natural Juice Drink, Dasmariñas, Cavite. Undergraduate thesis, De La Salle University-Dasmarinas.

Capiz, Patrick and Bardelas, Faith and Saavedra, Emmanuel (1996) A feasibility study on the manufacture of paper products from recycled paper. Undergraduate thesis, De La Salle University-Dasmariñas.

Caringal, Raymar S. (2013) A study in meeting the 3% allowable defect rate in producing 1811-8T-36MP (Module) in the Keyrin Electronics Philippines Incorporation from October 2012 to March 2013 amounting to P3,020,200.00. Undergraduate thesis, De La Salle University - Dasmariñas.

Carungcong, Mia and Villao, Ivy Paz and Tan, Ramilyn (1995) Plastic bottles manufacturing in Pamplona, Las Piñas. Undergraduate thesis, De La Salle University-Dasmariñas.

Castelltort, Clarice C. (2010) Factors affecting the exchange rate risk management practices of Japanese manufacturing firms inside selected economic processing zones in the Philippines. Masters thesis, De La Salle University-Dasmariñas.

Castillo, Kier S. (2014) A study on eliminating the 37.872% production loss in manufacturing 1/4 litre welcoat AP small tin cans amounting to Php2,883055.00 from the months of June to November 2013. Undergraduate thesis, De La Salle University-Dasmarinas.

Castillo, Mark Emille and Nono, Arnaldo and Sangalang, John Neil (1996) A project feasibility study on the production of rubber adhesives. Undergraduate thesis, De La Salle University-Dasmariñas.

Catli, Darlene and Ortiz, Josefina and Soriano, Ma. Christine (1997) A feasibility study on making children's dresses in Bacoor, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Cedilla, Pamela Gay and Realica, Rhea and Pasaporte, Irene (1997) Establishment of a gabi flour manufacturing business in Salinas, Bacoor, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Cesicar, Benjie P. (2014) A study on meeting the 0.25% allowable reject rate of premium refined sugar at central Azucarera Don Pedro, Incorporated. Undergraduate thesis, De La Salle University-Dasmarinas.

Chin, Rhonda and David, Maricon H. and Hernandez, Jennifer (1997) A feasibility study on the production of fish sausage in Dasmariñas, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Co, Sherwin (1999) Effects of internal coating spray in the production of cans. Undergraduate thesis, De La Salle University-Dasmariñas.

Colambo, Marineth and Cristobal, Dino and Astilla, Ruel (1995) Charcoal briquettes production in Dasmariñas, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Conception, Cheryl and Ledesma, Janneth and Navarro, Rochelle (1996) Manufacturing of leather shoes in Tagaytay City. Undergraduate thesis, De La Salle University-Dasmariñas.

Conte, Timothy James and Estrella, Jojemar and Tarcena, Benjamin Jr. G. (2005) The elimination of the 9% customer rejection rate of Plastic-Tana 809 at Nanbu Philippines, Incorporated. Undergraduate thesis, De La Salle University-Dasmariñas.

Conte, Timothy James F. (2006) Meeting the target machine performance rate in the production of plastic bottle caps at Crown Plastic Philippines, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Contridas, Maryben (1998) Cullet processing and trading. Undergraduate thesis, De La Salle University-Dasmariñas.

Coronel, Janico Rey A. (2015) A study on meeting the 30 % reduction rate changeover of surface mount technology on DANAMN Inc. in the production of SKU models in cell 4. Undergraduate thesis, De La Salle University - Dasmariñas.

Corpuz, Lloyd A. and Gudoyo, Joshua Paul R. (2006) Minimizing the 2.74% loss in production for Ralph Lauren Pants of SNK Garments Corporation. Undergraduate thesis, De La Salle University-Dasmariñas.

Cortez, Dolores Paz and De Castro, Maricris and Soriano, Janette (1995) Dried abalone manufacturing in Silang, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Costa, Janice and Pablo, Maila (1997) A project feasibility study on manufacturing of macaroni in Anabu Imus, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Costa, Rofha B. and Galicia, Charmagne V. and Relatorres, Jayree C. (2010) The Application and performance of rice husk ash blended cement to concrete. Undergraduate thesis, De La Salle University-Dasmariñas.

Crisanto, Sharelene Mae M. (2015) A study to meet the 2% allowable reject rate of concepcion durables Inc. in producing the inner door panel. Undergraduate thesis, De La Salle University - Dasmariñas.

Cuevas, Melanie (1998) A project feasibility study papercup making using cogon grass in Dasmariñas, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Cuevas, James Louie A. (2015) A study of meeting the allowable 1% reject rate of Hocheng Philippines Corporation (HCG) in producing OSIRIS 2 Ceramic toilet bowl. Undergraduate thesis, De La Salle University - Dasmariñas.

De Leon, Johan Vincent and Alvarez, Emerlito and Novicio, Jeffree (1997) Modernized pest control service in Dasmariñas, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

De Quiroz, Jon Albert D. (2009) A study to reduce the rejection rate of PSI to 247 tubes at SPI Semicon Asia, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Dela Rey, Rodolfo Jr. S. and Memije, John Francis H. and Quinto, Raffy Norbert A. and Soriano, Billy Keith S. (2005) A study on reducing the reject rate of Mizuuke Pot Products of Nanbu Philippines, Incorporated 3. Undergraduate thesis, De la Salle University-Dasmariñas.

Delima, Jo-Anne and Mendoza, Juvilyn and Generaga, Ma. Ingrid (1998) A project feasibility on manufacturing ceramic dinnerwares in Imus, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Depone, Maria Carla R. (2015) A study to eliminate the 17.54% production loss in SPI Semicon Asia Inc. in the production of Fuji FM31 from the months of July to December, 2014 amounting to Php 320.918.92. Undergraduate thesis, De La Salle University - Dasmariñas.

Desingano, Jesse S. and Manansala, Leo D. (2002) Recycling used rubber tire using vacuum gasification to produce electricity : alternative power source of the Philippines. Undergraduate thesis, De La Salle University-Dasmariñas.

Desingaño, Jesse S. and Molato, Darlene B. (2002) A study on the reduction of non-productive man-hours at Astec Power, Incorporated. Undergraduate thesis, De La Salle University-Dasmariñas.

Dijamco, Maritess and Tirol, Divine and Jimenez, Eduardo (1995) A project feasibility study on the manufacturing of corn oil in Gen. Trias, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Domingo, Paul Michael C. (2009) A study in reducing the reject rate of KPYJ in Honda motorcycle lamp. Undergraduate thesis, De La Salle University-Dasmariñas.

Dulguime, Mark Roger P. (2015) A study on eliminating the 7.45% production loss in producing the 40ml antiperspirant deodorant in the labelling process in blaine personal and home care corporation amounting to Php 2, 803, 164.82 for the month of July to December 2014. Undergraduate thesis, De La Salle University - Dasmariñas.

Ednaco, Jon Pat B. (2014) A study in eliminating 12.24% production loss of collar section line 2 operation in CS Garment, Inc. from the month of June to November 2013 amounting to P 15,118.200. Undergraduate thesis, De La Salle University-Dasmarinas.

Encomienda, Judith Anne M. (2020) Reduction of actual cycle timed by Implementing lean principles. Masters thesis, De La Salle Univerisity - Dasmariñas.

Encontro, John Ferdinand M. (2005) Minimizing the defective output on the Moly Foil Process at Ushio Philippines, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Enriquez, Kimberly S. (2014) A study on meeting the 3.0% allowable reject rate on producing seat mole at TopTech Parts Manufacturing Inc. Undergraduate thesis, De La Salle University-Dasmarinas.

Esmeralda, Marjun B. (2012) Motivations, constraints and effectiveness of environmental management system in manufacturing companies in Cavite. Masters thesis, De La Salle Univesity-Dasmariñas.

Espeleta, Jose Herbert D. (2003) Dried nata de coco fiber : an alternative for polypropylene (pp) plastic. Undergraduate thesis, De La Salle University-Dasmariñas.

Espino, Joana Rizza N. (2014) A study on eliminating the 6.02% productivity loss in the delivery process of raw materials amounting to Php 28,710.00 from the months of June to November 2013. Undergraduate thesis, De La Salle University-Dasmarinas.

Estrada, James Paolo B. (2014) A study on eliminating the 6.42% production loss in producing mefenamic acid 500 mg tablet in Amherst Laboratories Incorporated amounting to Php 12,959,192.25 from the months of June to November 2013. Undergraduate thesis, De La Salle University-Dasmarinas.

Estrella, Jojemar V. (2006) Minimizing the delivery delay of corrugated carton boxes at Berich Packaging Products. Undergraduate thesis, De La Salle University-Dasmariñas.

Fajardo, John Rhoy R. (2015) A study to meet the allowable 2% reject rate of Royal Tern Ceramics Phils. Inc. for the month of July to December 2014 in producing of Maya white toilet bowl. Undergraduate thesis, De La Salle University - Dasmariñas.

Federico, Abraham (2015) A study of eliminating 27.67% production loss in producing STC 335 K-828 in Yumex Philippines Corporation amounting to php 495, 673.05 from the months of June to November 2014. Undergraduate thesis, De La Salle University - Dasmariñas.

Ferrer, Katherine M. (2006) A study on eliminating the rejection rate of manufacturing television casing at Chin Su (Philippines) Company, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Flores, Mark Joe M. (2005) Reducing the diesel fuel consumption of the heater in Pigmentex, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Franco, Cheska Anna C. (2015) A study in meeting the 2.0% allowable reject rate in the production of Ryonan insert item (T129D30501F) at HS Technologies (Phils) Inc. from July to December 2014 amounting to Php 1,117,178. 25. Undergraduate thesis, De La Salle University - Dasmariñas.

Galang, Benjamin and Faegane, John Bert and Gloriani, Randy and Dinglasan, Jojit and Claveria, Alain and Tamayo, Mervyn Jay (2006) Eliminating the customer claim on reject soldering of Model EP-80 17VUL in Electro Magnetic Assembly of Sanwa Electric Philippines, Incorporated. Undergraduate thesis, De La Salle University-Dasmariñas.

Gandia, Juan Ysmael R. and Famero, Cillalois Marie D. and Sarno, Zarah Joy A. (2014) Cocunut shell ash as stabilizer for base course. Undergraduate thesis, De La Salle University-Dasmarinas.

Gangoso, Karilane Joy E. (2016) A study in eliminating the 4.84% production loss in producing SOT 669-BUK in the Die and Clip Attach Area of Power Department of NXP Semiconductors Inc. amounting to Php 17,406,155.00 from months of June to November 2015. Undergraduate thesis, De La Salle University-Dasmarinas.

Gervacio, Melody and Restituto, Joel Carlos (1997) A project feasibility study on manufacturing natural paint brushes from hog bristle in Silang, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Gonzaga, Philip A. and Lariosa, Brian L. and Mendoza, Ryan A (2001) Failure to meet 22% of the projected production output due to machine shutdown of Liwayway Marketing Corporation. Undergraduate thesis, De La Salle University-Dasmariñas.

Guillermo, Arvin P. (2003) Using gabi as an alternative material in producting paper in order to conserve trees. Undergraduate thesis, De La Salle University-Dasmariñas.

Gutierrez, Jan-Bert T. (2015) A study to meet the 0.6% allowable reject rate of TOMS manufacturing corporation in producing the item middle case turn. Undergraduate thesis, De La Salle University - Dasmariñas.

Haber, Samuel Steven D. (2006) A study in the reduction of defects in producing reflow machine parts in Eightech Techtron Philippines, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Hermoso, Amor Lamex L. and Oreta, Jay M. (2012) The comparable stresses of abaca fiber as a concrete reinforcement material. Undergraduate thesis, De La Salle University-Dasmariñas.

Hilario, Mark Anthony A. (2012) TOMS manufacturing corporation is experiencing 5.19% lowproductivity in machine 21 tray exit inner during February and April 2011 amounting to Php 1,083,681. Undergraduate thesis, De La Salle University - Dasmariñas.

Ibañez, Lance Leonard M. (2009) A study on improving the utilization of Machine Tevopharm on line of X.O confectionary on Universal Robina Corporation. Undergraduate thesis, De La Salle University-Dasmariñas.

Janaban, Denice P. (2015) A study in eliminating the average of 2.19% production loss in the water probing process of WT6NCP1536 device at ON semiconductor Philippines Inc. amounting to Php 27, 029, 339.54 from the months of January to June 2015. Undergraduate thesis, De La Salle University - Dasmariñas.

Javier, Macario Tomas III A, (2001) Minimizing the delays in the process of receiving in the Warehouse of Koldstor Centre Philippines, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Karikitan, Jerome A. (2014) Proposed Autoempire. Undergraduate thesis, De La Salle University-Dasmarinas.

Kiamzon, Klaudin Emili A. (2014) A study on eliminating the 14.88% rework rate in the coating process of 2PK panel center T8 at Philippines Mansho, Inc. amounting to Php 2,257,881.40 from the months of June to November 2013. Undergraduate thesis, De La Salle University-Dasmarinas.

Lao, Nicodemus O. and Madula, George F. (2002) A study on manpower resources with 61.90% non-productive activities in the Production Area of Globetronics Philippines, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Larga, Rowie Rose C. (2014) A study on meeting the 3% allowable reject rate in producing best food real mayonnaise 1kg at Unilever Philippines Inc. Undergraduate thesis, De La Salle University - Dasmariñas.

Lariosa, Brian L. and Navales, Andrean S. (2002) Raw materials and finished products are being placed in non-designated areas due to insufficient storage area (Leader Cable Philippines Corporation). Undergraduate thesis, De La Salle University-Dasmariñas.

Lauzon, Lesley-Anne N. (2006) The elimination of the material loss in the production area of Liwayway Marketing Corporation. Undergraduate thesis, De La Salle University-Dasmariñas.

Lava, Wilbur M. (2001) A study on how to improve product efficiency for at least 85 percent in bottling division of Asia Brewery. Undergraduate thesis, De La Salle University-Dasmariñas.

Levardo, Jessica Jane (2015) A study on meeting the 2.00% allowable reject rate in producing Antibiotics Multivitamins Water Soluble powder (SPECTAMED) in Refamed Research Laboratory Corporation amounting to php 3,157,000 from June-November 2014. Undergraduate thesis, De La Salle University - Dasmariñas.

Ligad, Kristine Joy C. (2006) A study on elimination of the rejection rate on plastic bottle caps experienced at Crown Plastic Philippines, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Lleno, Carlson Marc B. (2014) A study on minimizing the 9.74% production loss by 75.54% in the Die Clip Attach Area of Power Department in producing SOT669-BUK of NXP Semiconductors Inc. amounting to Php 14,347,716.60 from the months of June to November 2013. Undergraduate thesis, De La Salle University-Dasmarinas.

Lobaton, Warner (1998) Manufacturing of wire harness in Panapaan, Bacoor Cavite S.Y. 1996-1997. Undergraduate thesis, De La Salle University-Dasmariñas.

Loveria, Josephine P. (2001) Transportation reduction through an improved layout. Undergraduate thesis, De La Salle University-Dasmariñas.

Macadangdang, Louie Rei C. (2002) Improvement of service process that will lead to a more efficient and fast service at Honda Cars Alabang. Undergraduate thesis, De La Salle University-Dasmariñas.

Madula, George F. and Ancheta, Macartney M. (2001) Pulse Philippines Tooling Workshop-Engineering Section did not meet the fixtures requested by the production and other department Pulse Philippines : a technitrol company. Undergraduate thesis, De La Salle University-Dasmariñas.

Madula, George F. and Asper, Aristeo D. (2002) Utilization of portable forward cutting powered saw in rattan furniture industry of the Philippines. Undergraduate thesis, De La Salle University-Dasmariñas.

Magno, Abigael D. (2014) A study on meeting the 1% allowable reject rate of San Miguel Brewery Inc.. (POLO Brewery) in producing 30 mL San Miguel flavored beer for the months of June to November 2013. Undergraduate thesis, De La Salle University - Dasmariñas.

Manalo, Rio Blanca L. (2015) A study to meet the 0.5% allowable reject rate of HS technologies Phils., Inc in the production of MS Bracket. Undergraduate thesis, De La Salle University - Dasmariñas.

Manguerra, Maria Suzaine P. (2014) A study on eliminating the 17.95% production loss in the manufacturing of EU Cover ESCN automotive parts at Philippines Mansho Incorporated amounting to Php 1,678,647.60 from June to November 2013. Undergraduate thesis, De La Salle University-Dasmarinas.

Marasigan, Victor S. (2010) Demand decision for management consulting services in selected manufacturing companies at First Cavite Industrial Estate, Dasmariñas, Cavite. Masters thesis, De La Salle University-Dasmariñas.

Marvin, Ronald C. and Sotejo, Mary Grace V. (2002) Improve the existing arrangement of the Shipping and Loading Area of American Standard Sanitary Wares Manufacturing Corporation. Undergraduate thesis, De La Salle University-Dasmariñas.

Matias, Fernando Antonio O. (2005) Eliminating unsafe conditions in the Production Area of Coca-Cola Bottlers Philippines, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Medina, Arizza Mae P. (2015) A study on meeting the 3% allowable reject rate in the production of model 16T-01MP micro speaker at Sanvil Industrial Supply amounting to Php 2, 969, 280.00 from the months of June 2014 to November 2014. Undergraduate thesis, De La Salle University - Dasmariñas.

Mendoza, Ryan and Roxas, Randol (2002) Palm oil as an alternative for diesel fuel in running diesel engine vehicle. Undergraduate thesis, De La Salle University-Dasmariñas.

Mendoza, Ryan and Roxas, Randolph (2002) A system study on the industrial safety and health management in the Manufacturing Area of Specialty Oils, Inc., Carmona, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Mercado, Danielle L. (2015) A study on eliminating 3.14% production loss in producing bonna 900g at wyeth nutrition (Nestle) Canlubang factory from the month of July to December 2014 amounting to 3, 503, 292.00. Undergraduate thesis, De La Salle University - Dasmariñas.

Mercurio, Gilbert B. (2001) A proposed lay-out on materials and equipment in technical laboratory of Dutch Boy Philippines. Undergraduate thesis, De La Salle University-Dasmariñas.

Mondejar, John Abraham A. (2014) A study in meeting the 2.5% allowable reject rate in producing PO 2063 in CS Garments Inc. from June to November 2013 amounting to Php 4,640.807.5. Undergraduate thesis, De La Salle University-Dasmarinas.

Montano, Ernesto Jr. L. (2001) "Cause of ineffeciency in the after diecasting screening section process". Undergraduate thesis, De La Salle University-Dasmariñas.

Morales, , Ma. Claudette T. (2015) A study to meet the allowable 2% rejection rate in the production of IMV25 of Famous Secret Precision Machining Inc. Undergraduate thesis, De La Salle University - Dasmariñas.

Nadal, Karl Lawrence and Cajigal, Ronnel (2002) Advanced waste water treatment in steel industries for reuse in different industrial purposes SY 2001-2002. Undergraduate thesis, De La Salle University-Dasmariñas.

Nadal, Karl Lawrence M. and Santillan, Ariel (2002) Improvement of dough sheet cutting time by 73.2% in the manufacture of different chips and crackers in Liwayway Marketing Corporation. Undergraduate thesis, De La Salle University-Dasmariñas.

Navarrete, Piere Candice V. (2013) Wage gaps in agriculture, manufacturing and services in the Philippines. Undergraduate thesis, De La Salle University - Dasmariñas.

Norcio, Analiza and Rosaroso, Melany and Sauquillo, Jheny (1997) A project feasibility study on decorative candles manufacturing in Dasmariñas, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Nuestro, Julius Jordan N. (2014) A study in minimizing the 15.88% production loss in the production of coat at Onesimus Corporation amounting to Php 10,350,169.98 from the month of June-November 2013. Undergraduate thesis, De La Salle University-Dasmarinas.

Obusan, Joseph V. (2014) A study on meeting the 2% allowable reject rate of D side connector block RHD in Toms Manufacturing Corporation Amounting to Php 1,629.961.25 from June to November 2013. Undergraduate thesis, De La Salle University - Dasmariñas.

Ocampo, Rolando D. (2001) Effective Strategy in packaging the hotdog products. Undergraduate thesis, De La Salle University-Dasmariñas.

Octavio, Roderick and Palacios, Gina Aura and Rodriguez, Rhomina (1994) Peanut brittle. Undergraduate thesis, De La Salle University-Dasmariñas.

Octavo, Mark Vincent E. (2001) Associated factors in reducing product deficiency encountered in forming department of Asia Brewery Incorporated. Undergraduate thesis, De La Salle University-Dasmariñas.

Olivar, Hansen V. (2001) Resolving human resource problems related to quantity and quality productivity. Undergraduate thesis, De La Salle University-Dasmariñas.

Omalsa, Louie (1997) JML macaroni manufacturing. Undergraduate thesis, De La Salle University-Dasmariñas.

Orbilla, Clifford B. (2001) Proposed layout for the improvement of issuing process in the warehouse of Engineering Department at San Miguel Campo Carne Corporation. Undergraduate thesis, De La Salle University-Dasmariñas.

Ortiz, Arra Mae B. (2014) A study on eliminating the 35.59% rework rate in the production of LC vit 120 ml amounting to Php 2,658.006 frin the month of June to November 2014 Apt Vet Link, Inc. Undergraduate thesis, De La Salle University-Dasmarinas.

Pangilinan, Pamela D. (2014) A study on eliminating the 14.09% production loss in producing reel 13 x 12 mm of PaintPlas Corporation amounting to Php 22,767,250.00 from the months of June to November 2013. Undergraduate thesis, De La Salle University-Dasmarinas.

Parati, Dianne Lara D. (2012) Eliminating the 9.22 percent productivity loss experienced by assembly of Max Fan Assy 100 for the month of July 2011-December 2011. Undergraduate thesis, De La Salle University - Dasmariñas.

Patambang, Jesus Casanova (2006) Minimizing the production loss in CMT Section of JEA Steel Industries, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Pelante, Mariel L. and Grana, Marijul C. (1998) The production of whitening cream in Salawag, Dasmariñas, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Peleño, Romualdo and Flores, Jeromee (1997) Manufacturing of mango wine. Undergraduate thesis, De La Salle University-Dasmariñas.

Pepito, Mark Napoleon M. (2009) A study on improving the 66% production of ROHM CT-212 in Line 4. Undergraduate thesis, De La Salle University-Dasmariñas.

Perez, Rosario and Pillerva, Myra and Sy, Wilbert (1995) Production of flavored banana snack in Silang, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Perocho, Ann V. and Ferrer, Katherine M. and Ramirez, Rochelle L. (2005) A study on minimizing the 3.78 percent loss in manufacturing Metformin tablets at Sydenham Laboratories, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Poblete, Paul Raven M. (2015) A study in meeting the 3.00% allowable reject rate of NTPI International Inc. in producing the carrying rollers from the Months of January - June 2015 amounting to Php 974,614.50. Undergraduate thesis, De La Salle University - Dasmariñas.

Quiacos, Andriane P. (2004) Minimizing the defects due to length variation of the radial tread in 8x8 cold feed extruder. Undergraduate thesis, De La Salle University-Dasmariñas.

Quiday, Rommell and Rivera, Jose (1996) A project feasibility study on hand-made paper productions in Parañaque. Undergraduate thesis, De La Salle University-Dasmariñas.

Razal, Jaclyn Grace and Peidad, Vivien (1998) A feasibility study on the manufacture of cassava chips in Dasmarinas, Cavite. Undergraduate thesis, De La Salle University-Dasmarinas.

Remolar, Ferlyn (2006) Minimizing the delayed output in the manual washing 1 of Wilkins Philippine Corporation at Philippine Beverage Partners, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Remulla, Aivi and Benitez, Eva and Baurile, Edwin (1995) Soft cheese manufacturing. Undergraduate thesis, De La Salle University-Dasmariñas.

Reyes, Helen and Alicdan, Maribel and Moncada, Edler (1997) A feasibility study on the production of bottled bagoong with pork bits in Imus, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Reyes, Jonar S. (2001) Improvement of existing materials arrangement and its identification to eliminate long method of receiving and storing materials in the logistic section of Suminac Philippines. Undergraduate thesis, De La Salle University-Dasmariñas.

Ricasata, Elaine (1998) A project feasibility study on manufacturing footware in Imus, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Riego De Dios, Carel B. (2014) A study on eliminating the 15.27% production loss in manufacturing guide drive chain (KPYN) amounting to Php 1,001,26450 from the months of June to November 2013 in PainPlas Corporation. Undergraduate thesis, De La Salle University-Dasmarinas.

Rocela, Ivy and Arcullo, Noel and Castillo, Shella Marie (1998) A project feasibility study on establishing a coffee mill in Tagaytay City. Undergraduate thesis, De La Salle University-Dasmariñas.

Rodriguez, Roderick and Samuel, Arvin and Toh, Philip (1998) A project feasibility study in firm engaged manufacturing shine and scent 2 in 1 floorwax, Dasmariñas, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Rojo, Raffy O. (2014) A study in minimizing the 34.12% reject rate in the production of RTW Barong at Onesimus Corportation amounting to Php 340,344.00 from the month of June-November 2013. Undergraduate thesis, De La Salle University-Dasmarinas.

Romea, Xanthynn Candize M. (2015) A study on minimizing the average of 4.46% rework rate in producing the Gear Case 5GN-A in the Painting Department of Cavite Nagano Seiko, Inc. amounting to Php 1,234.348.60 from the months of June to November 2014. Undergraduate thesis, De La Salle University - Dasmariñas.

Romero, Madonna C. (2001) Automated material requisition in the store room department of San Miguel Yamamura Ball Corporation. Undergraduate thesis, De La Salle University-Dasmariñas.

Rosanes, Mizzikiel O. (2014) A study on meeting the 2% allowable reject rate of tobacco cuts in the Philippines Bobbin Corporation Amounting to PhP 1,949,288 from the Months of May to October 2013. Undergraduate thesis, De La Salle University - Dasmariñas.

Rotairo, Darrel John and Gelle, Tina Marie and Sapida, Randy (1995) Production of coffee hull briquettes in Silang, Cavite : a feasibility study. Undergraduate thesis, De La Salle University-Dasmariñas.

Saflor, Maria Magda Katrina J. (2015) A study on eliminating the 14.75% production loss in producing pulley set amounting to Php 2,774,902.79 from June to November 2014 in BIG Philippines Corporation. Undergraduate thesis, De La Salle University - Dasmariñas.

Salazar, Flordeliza and Bautista, Maricris (1997) A project feasibility study on manufacturing crab balls in Tanza, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Saldaña, Jeffrey and Ceniza, Angel (1993) A project feasibility study on loofa manufacturing in Almanza, Las Piñas, Metro Manila. Undergraduate thesis, De La Salle University-Dasmariñas.

Salonga, Erwin (2003) Pandan extract : non-toxic alternative to chemical insecticides. Undergraduate thesis, De La Salle University-Dasmariñas.

Santos, Kenncy Sherin L. (2014) A study on eliminating the 1.28% production loss in the production of SOT453A units of NXP Semiconductors Cabuyao Inc. amounting to Php 8,093,990.08 from the months of June to November 2013. Undergraduate thesis, De La Salle University-Dasmarinas.

Santos, Kristine Roma T. (2014) A study on eliminating the 5.27% production loss amounting to Php 47,807,334.64 in the process of wafer mounting and sawing of NCV78663 LED Driver IC in probe area for the months of June to November 2013. Undergraduate thesis, De La Salle University-Dasmarinas.

Saura, Reynold and Ayon-ayon, Melchor and Garces, Marc Allen and Tamunda, Michael (2005) Reducing the material loss of the Product 710 Gloss Masta White QDE in Dutch Boy Philippines, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Sayaman, Kristell John P. (2015) A study to meet the 1% allowable reject rate of Toms Manufacturing Corporation in producing the item Acry panel. Undergraduate thesis, De La Salle University - Dasmariñas.

Solis, Cecille B. (2008) Innovation factors among local cosmetics and personal care product manufacturers. [computer file]. Masters thesis, De La Salle University-Dasmariñas.

Sotejo, Mary Grace V. and Marvin, Ronald C. (2002) Fluidize-bed gasification of corncobs as an alternative source of diesel fuel. Undergraduate thesis, De La Salle University-Dasmariñas.

Suarez, Rogelio Jr. A. (2006) Minimizing the number of rejects on 10' x 12' fiberglass roofing products in Naturalite Industrial Corporation. Undergraduate thesis, De La Salle University-Dasmariñas.

Tabilin, Renz Julius B. (2015) A study on meeting the allowable 1% reject rate in producing Lush candies at Universal Robina Corporation- Cavite plant. Undergraduate thesis, De La Salle University - Dasmariñas.

Talay, Mac Wesley (2006) Study on increase on production output on the blowing process at Global Lighting Philippines, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Tallada, Salvacion and Pontelo, Marina and Geraldo, Virginia (1995) A project feasibility study on the establishment of industrial salt manufacturing in Calatagan, Batangas. Undergraduate thesis, De La Salle University-Dasmariñas.

Tamunda, Michael C. (2006) Reducing the leakage percentage on the dry chem fire extinguisher units of Rhino Firebuster Supplier. Undergraduate thesis, De La Salle University-Dasmariñas.

Tarcena, Benjamin Jr. G. (2006) A study on the elimination of the rejection rate of Oshibuchi 3-20-3, a selected item at Nanbu Philippines, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Taruc, Vincent M. (2002) An improvement on area's productivity and releasing of serviced car by at least 100% at Citimotors, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Tayag, Rhadina Garcia (2017) Analysis of cycle time and product yield in plastic production at United Polyresins Inc. Masters thesis, De La Salle University-Dasmariñas.

Tenorio, Franklin P. (2009) Meet the target output of Ceiling Assembly Model J-Furring 5.0 meters x 0.6 millimeters in monthly production of JEA Steel Industries, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Tesalona, Mark Anthony Q. (2009) A study on reducing the average percentage rejects of 25.83% on the laundry process in the Cleanroom Section of Isuta Philippines, Incorporated amounting to Php 64, 875.00 per month. Undergraduate thesis, De La Salle University-Dasmariñas.

Tiangco, Cyrelle Jane L. (2015) A study in meeting the 2% allowable reject rate in producing PSI P3 Tube In the PSI/ Semicon Asia, Inc. from july to december 2014 amounting to Php 714,584.16. Undergraduate thesis, De La Salle University - Dasmariñas.

Tibayan, Nancy and Ferrer, Jemice and Porcioncula, Rowena (1997) Project feasibility study on the manufacturing of fish Pizza in Tagaytay. Undergraduate thesis, De La Salle University-Dasmariñas.

Topacio, Aron and Calilap, Throy (2002) Recycling of used rubber tires into paint pigments SY 2001-2002. Undergraduate thesis, De La Salle University-Dasmariñas.

Torreno, Marivic G. (2001) Improvement on the motion sequence design by establishing motion sequence and redesigning workstation. Undergraduate thesis, De La Salle University-Dasmariñas.

Torres, Emerson S. and Ancheta, Macartney M. (2002) Bagassed used in steam power plant as an energy supply alternative for sugar industry. Undergraduate thesis, De La Salle University-Dasmariñas.

Torres, Emerson S. and Canales, Hernan W. (2002) Unattained 76.6°C recommended boiler temperature and 43.33°C recommended feed water temperature in Oleo Manufacturing Corporation located at South Coast Industrial Estate, Bancal, Carmona, Cavite. Undergraduate thesis, De La Salle University-Dasmariñas.

Tribiana, Norris T. (2014) Economic valuation of the nipa industry in Mauban, Quezon. Undergraduate thesis, De La Salle University - Dasmariñas.

Tribiana, Norris T. (2014) Economic valuation of the nipa industry in Mauban, Quezon. Undergraduate thesis, De La Salle University-Dasmarinas.

Uycoque, Jeddison Kim M. (2009) A study in eliminating the 3.87% variance of Philip Morris Philippines Manufacturing, Inc. in the inventory of the raw material tobacco. Undergraduate thesis, De La Salle University-Dasmariñas.

Vargas, Eric A. (2002) Improving the 5'S inspection and workplace layout in the Production (Post Press) Area of United Graphics Expression Corporation. Undergraduate thesis, De La Salle University-Dasmariñas.

Velando, Marilou C. (2003) High strength paper sheet from bamboo (bambusa blumena) and kapok fiber (ceiba pentadra): alternative. Undergraduate thesis, De La Salle University-Dasmariñas.

Velante, Daryl and Crema, Nerissa and Escaño, Avegail (1997) A project feasibility study on manufacturing of ladies shoes in San Vicente, Biñan, Laguna. Undergraduate thesis, De La Salle University-Dasmariñas.

Verdey, Criselda B. (2006) Minimization of the downgrades on the rollforming process of the Production Area of Philmetal Products, Inc. Undergraduate thesis, De La Salle University-Dasmariñas.

Villafranca, Edgarlyn Blesilda G. (2014) A study to minimize by 81.67% the average defect rate in the production of 0GPD40G6FK1-M of Scheider Electric from May to October 2013 amounting to Php 10,8000,000.00. Undergraduate thesis, De La Salle University-Dasmarinas.

Villanueva, Rusela Feliciana A. (2013) A study on eliminating the 8.62 percent production loss of Pepsi Cola Products Philippines Inc. in producing mug root beer 8 oz amounting to Php 1,687,751.56 from the month of October to March 2013. Undergraduate thesis, De La Salle University - Dasmariñas.

Villarico, Marvin S. (2010) Determinants of effective implementation of six sigma program among manufacturing industry in selected economic processing zone in the Philippines. Masters thesis, De La Salle University-Dasmariñas.

Viterbo, Merian Leslie Cabuyao (2013) Proposed Philippines' furniture hub. Undergraduate thesis, De La Salle University-Dasmarinas.

Wan, Jian Yin (2004) Sales promotion practices of selected food additives manufacturing companies in Shanghai, China. Masters thesis, De La Salle University-Dasmariñas.

Yartey, Philip (2002) Elimination of inaccuracy in direct materials inventory records. Undergraduate thesis, De La Salle University-Dasmariñas.

Zafra, Joy Ann Marie P. (2014) A study on eliminating the 10.31% production loss in producing magic cream in Universal Robina Corporation amounting to Php 1,057,74900 from June to November 2013. Undergraduate thesis, De La Salle University-Dasmarinas.

Artefact

Austria, Eobii Arre D. and Mojica, Ramon Raphael G. and Vidal, Michael Gabriel Raphael B. (2014) Development of three process corn mill (De-Husking, De-Kernelling, Milling). [Artefact]